The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.
For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.
As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.
Highlights:
Maximum durability: thanks to high-quality metal chassis and metal drive components
4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheels
Full versatility: With 8-position tyres for drifting, off-road and on-road racing included in delivery
Further features:
RTR version (ready-to-run) incl. remote control, battery, charger
Fully ball bearing mounted vehicle for smooth drive performance
LED lighting
Polycarbonate chassis dust cover
Sturdy metal main strut for added rigidity
Adjustable metal oil pressure shock absorbers
Individual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibility
All plastic parts made of composite plastic for better durability
Sturdy bodyshells with cool looks
Technical data:
Scale: 1:14
Length: 320mm
Width: 153mm
Height: 115mm
Weight: 1124g incl. battery
Wheelbase: 190mm
Track width front: 128mm
Track width rear: 128mm
Ground clearance: 15mm
Front wheels: Outer diameter/width 58/22mm
Rear wheels: Outer diameter/width 58/22mm
Rim diameter: 42mm
Front shocks: 65mm
Rear shocks: 65mm
Brake: Electronic
Receiver incl. Gyro function (driving stability system)
ESC: 45A brushless
Motor: 2845 3700KV
Drive system: Cardan
Drive system: 4WD
Steering servo: Digital 17g
Main material: Metal / Composite plastic
Battery compartment dimensions: 86 x 38 x 32mm
Battery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connector
Battery dimensions: 70 x 36 x 20mm
Battery weight: 99g
Ride time: 10-12min
Top speed: 40-45km/h
Remote control: 4-channel, 2.4GHz
Range: 100-150m
Charger: LiPo charger
Charging time: approx. 240min
Scope of delivery:
Model
Remote control
Battery
Charger
Drift tyres
Street tyres
Off-road tyres
Gyro
Accessories
Instruction manual DE/EN
Required accessories:
2x 1.5V AA batteries for the remote control
