Amewi Hyper GO Buggy Brushless 3S 4WD 1:16 RTR Blue

Brushless racing buggy in 1:16 scale, which comes to 62 km/h top speed thanks to high-performance drive and 3S LiPo power. Many newly developed components such as aluminum oil pressure shock absorbers, metal CVD drive shafts, cardan shaft, gearboxes and differentials ensure high longevity of the off-road racer. An active fan on the motor allows for optimum cooling. The adjustable chassis for more tracking and a Wheelie bar for more driving stability round off the package in addition.
The entire electronics are protected against splashing water and allows unrestricted outdoor use. The large-sized high-grip tires made of soft rubber ensure full hold on every substrate at full throttle. If it is not supposed to be so fast, there is a switch at the transmitter that hits the maximum speed to 70 percent.
The handy 3-channel remote control transmits all functions to be interference-proof and also allows the operation of several models in parallel with the 2.4GHz system. The model is available as a RTR package (Ready-to-Run), i.e. all components – except for household batteries for remote control – are already included in the scope of delivery.

Highlights:
All drive components made of metal (pinion, shafts and differentials): for high durability of the components
Metal cardan shaft: for wear-free drive to the axes
Metal CVD drive shafts: on all axes for direct drive

More features:
3S LiPo Power with 11.1V, 25C and 1050mAh in a specially developed hardcase battery
Professional brushless racing motor for high speeds up to 62km/h
Fast steering servo for agile change of direction on every surface
Oil pressure shock absorber made of aluminium
Metal cardan shaft
Hood with body brackets and rubber straps for safe removal
Racing competition look of the body
Receiver, ESC and motor separate
Active fan on the motor for optimal cooling
Robust body
Metal front and rear chassis set
Composite chassis for good durability
Wheelie-Bar included in delivery

Technical data:
Scale: 1:16
Length: 275mm (incl. Wheelie bar: 320mm)
Width: 210mm
Height: 105mm
Weight: 1054g incl. Battery
Wheelbase: 175mm
Track width front: 175mm
Rear track width: 175mm
Ground clearance: approx. 25mm
Front wheels: outside diameter/width 75/34mm
Rear wheels: outer diameter/width 75/34mm
Rim diameter: 55mm
Gearbox: metal
Shock absorbers front: 60mm
Rear damper: 60mm
Brake: electronic
Controller: Brushless 45A
Engine: 2845 Brushless
Drive system: cardan metal
Lenkservo: Mini
Main material: Composite plastic
Battery compartment Dimensions: 110x35x24mm
Battery: LiPo 3S 11,1V 1050mAh, 25C, hardcase, Deans plug / T-plug, 78x34x30mm, 100g
Travel time: approx. 10-12min
Maximum speed: up to 62km/h
Remote control: 3-channel, 2.4GHz
Range: approx. 100m
Charger: USB Balancer Charging Cable with 11.1V and 1.2A Output Power
Charging time: approx. 45-60min

Scope of delivery:
Vehicle
Remote control
Battery
Charging cable
Screw set
Tool
Wheelie bar
Operating instructions DE/EN

Required accessories:
2x AA Mignon batteries for remote control