The Amewi LAMA helicopter is a full-scale replica of the famous SA-315 Lama helicopter from the French manufacturer Aérospatiale. With its characteristic space frame construction, this light multi-purpose helicopter was specifically designed for use in high, hot environments and held the absolute altitude record for years. A number of Lama helicopters are still in use today, especially in Switzerland.
In the new V2 version, this 4-channel single-rotor helicopter impresses with its state-of-the-art technology in conjunction with the new auto take-off/landing system, which can be switched on at the push of a button on the transmitter. Being very stable in the air makes flying very interesting even for beginners. Due to the powerful engine and the unique, special design, the LAMA can easily be flown outdoors even in light winds. The four channels enable the pilot to perform good, clean and beautiful flight maneuvers. The precise servo control of the swashplate and the different flight phases of the model also enable faster forward flight. The latest generation of 2.4GHz wireless technology allows a range of up to 100 meters outdoors.
Highlights:
Auto take-off/landing at the push of a button on the transmitter
Scale construction with many details like the original
Mode 1 and Mode 2 control can be switched on the transmitter
Other features:
New remote control system with the latest technology
LED lighting
Long flight time of approx. 8 minutes
Very good workmanship and high quality of the material
Technical data:
Hull length: 425mm
Fuselage width: 95mm including landing gear
Height: 170mm
Rotor diameter: 400mm
Tail rotor diameter: 128mm
Main material: plastic
Weight ready to fly: approx. 320g including battery
Remote control: 2.4GHz, 8 channels, Mode 2 (Mode 1 switchable)
Frequency band from 2,405 to 2,475MHz, 18dBm
Range: approx. 100m
Servos: 2x mini servo
Battery: Li-Po, 2S, 7.4V, 840mAh, 20C, soft case, BEC connector system, LxWxH: 55x30x16, 48g
Flight time: approx. 6 to 8 minutes
Charger: USB charging cable with 1.3A output
Charging time: approx. 30 to 40 minutes
Scope of delivery:
Model
Channel
battery pack
Charging cable
Replacement blades front/rear
screwdriver
Instructions DE/EN
Required accessories:
6x 1.5V Mignon AA batteries for transmitter
