A carbon-look speedboat with jet drive and LED lighting is now available. This 335 mm long racing boat can also be driven on flat water surfaces. This is because the jet drive opens up significantly more application possibilities than a conventional propeller drive. The water is sucked in under the hull (protected by a protective grid) and expelled again as a compressed jet at the stern. This results in enormous propulsion and strong acceleration. Even a submerged meadow is suitable as a driving surface, and sticks, stones or other obstacles in the water are simply driven over. The rudder system is controlled simply by adjusting the drive jet (thrust vector control). This makes the boat highly agile and manoeuvrable. Even the narrowest waters are suitable for sailing in this design. The hull is double-covered (with two different covers) and the brushed motor in the boat is water-cooled. The interference-free 2.4 GHz transmitter system has additional functions such as switchable light, low voltage warning, trim, thrust vector control deflection limitation and range warning if the maximum range is exceeded.
Highlights:
2.4GHz transmitter with protective functions: Actively prevents the battery from being used for too long (undervoltage) or the range of the model being exceeded
Switchable LED lighting front & rear: Convenient via transmitter to make driving in the twilight an experience too
Double fuselage cover: Additional protection against water ingress in the event of e.g. rollovers or other accidents
Further features:
RTR version (Ready-to-Run) incl. remote control, battery and charging cable
Carbon fibre look of the entire surface (upper deck)
Active water cooling for the motor
Trim and dual rate for steering
High-strength ABS plastic fuselage
Thrust vector control for maximum manoeuvrability
Interference-free 2.4 GHz system
Large Li-Ion battery for long driving times of up to 12 minutes
Practical USB charging cable included
Technical data:
Length: 335mm
Width: 125mm
Height: 75mm
Weight (incl. battery): 558g
Fuselage material: ABS plastic
Motor: 390 brushed
Servo: Mini Digital JR connector
Controller: All-in-one unit brushed
Remote control: 3 channels, 2.4GHz
Range: 60-80m
Battery: Li-Ion 2S 7.4V 2000mAh 15C, 18650 round cells, Deans plug (T-Plug), 70x37x18mm, 102g
Ride time: up to 12min
Maximum speed: 40km/h
Charger: USB charging cable
Charging time: 90-120min
Scope of delivery:
Model
Remote control
Rechargeable battery
Charging cable
Tool kit
Boat stand
Instructions DE/EN
Required accessories:
3x 1.5V Mignon AA batteries for the remote control
Adhesive tape for the cabin
