No white edges due to fumes
The Activator is a non-blooming cure accelerator, suitable for all cyanoacrylate-based super glues as well as all model-building rigid foams such as Styrofoam, Styrodur, Arcel, Elapor, Solidpor, Hypodur, Z-Foam, Depron, Selitron, EPO, EPP or EPS. The spray bottle contains 200 ml of activator as an aerosol. It is recommended for use in sub-optimal environmental conditions, for thick adhesive layers, bonding of inactive materials or curing of leaked adhesives.
Classification of the substance or mixture
Hazard categories:
Aerosol: Aerosol 1
Serious eye damage/eye irritation: Eye Irrit. 2
Specific target organ toxicity (single exposure): STOT SE 3
Hazard Statements:
Extremely flammable aerosol.
Pressurised container: May burst if heated.
Causes serious eye irritation.
May cause drowsiness or dizziness.
Hazard components for labelling
Acetone; propan-2-one; propanone.
Signal word
Danger
Hazard statements
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Special labelling of certain mixtures
EUH066 Repeated exposure may cause skin dryness or cracking.
Other hazards
In case of insufficient ventilation and/or through use, explosive/highly flammable mixtures may develop.
