| Dimension | 40.5 mm x 20.0 mm x 37.5 mm |
| Weight | 54 g |
| Operating Speed | 0.11 sec/60° |
| Output torque | 5.5 kg-cm |
This is the S9250 Digital Servo w/Two Ball Bearings for
Helicopter and Aircraft use and Comes with “J” Connector Pre-Installed.
This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
FEATURES:
Digitally Enhanced Microprocessors Cut About 1/2 the Response Time
From Transmitter Input To Servo Reaction.
Coreless Motor
Dual Ball Bearing Output Shaft
Metal Gears
High Speed
Case is Made of Black Plastic
Dust and Water Resistant (Not Waterproof)
Great for Helicopters or Airplanes Where Higher Torque and Speed are Needed.
INCLUDES:
One Digital Helicopter/Aircraft Servo w/Small Round Horn
Four Rectangular Grommets
Four Brass Bushings
Four Mounting Screws
One Large Round Horn
One Six Arm Horn
SPECS:
Speed: .11 sec/60° (based on 4.8V)
Torque: 76 oz-in (5.5 kg-cm) (based on 4.8V)
Weight: 1.9oz (53g)
Power Supply: 4.8V (Futaba does not recommend using 6V)
Length: 1.6″ (41mm)
Width: .8″ (20mm)
Height: 1.5″ (38mm)
