Coreless motor, 4.8V only
| Dimension | 40.0 mm x 20.0 mm x 36.6 mm |
| Weight | 50 g |
| Operating Speed | 0.14 sec/60° |
| Output torque | 6.6 kg-cm |
This is the Futaba S9252 Digital High Torque, All-Purpose F3C Servo with High-Current Wire Lead and “J” Connector Pre-Installed.
This servo can produce high-current draw from your batteries
If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
FEATURES:
Digitally enhanced microprocessors cut about half the response time from transmitter input to servo reaction.
Coreless motor
Dual ball bearings on the output shaft
Plastic/nylon gear train
Moderately high speed
High current, high capacity wire lead with low resistance
Case is made of Black plastic
Dust and water resistant (Not waterproof)
Works well with all control surfaces on F3C helicopters or precision fixed wing aircraft.
INCLUDES:
One Digital All Purpose Servo w/Small Round Horn
Four Rectangular Grommets
Four Brass Bushings
Four Mounting Screws
One Large Round Horn
One Six Arm Horn
SPECS:
Speed: .14 sec/60° (based on 4.8V rating)
Torque: 92 oz-in (6.6 kg-cm) (based on 4.8V rating)
Weight: 1.8oz (50g)
Power Supply: 4.8V (Futaba does not recommend using 6V)
Length: 1.6″ (41mm)
Width: .8″ (20mm)
Height: 1.5″ (38mm)
