Razer ten 60A Regulator:
Whether 1/10 on-road or 1/10 off-road, the Razer ten 60A is always the first choice for reliability, efficiency and durability. Various setting and programming options leave nothing to be desired.
All cables are already wired ready for connection on the controller, no soldering necessary.
Battery connection: T-plug,
motor connection: 4mm sockets
Properties:
- Completely waterproof and dustproof
- ON / OFF switch with setup button
- S-BEC with 6V and 3A peak current
- Plug and Play, battery and motor plug already soldered
- Multiple protections: undervoltage shutdown, thermal protection and protection against signal loss.
- Simple programming via set button
- Separate programming port, easy connection of the LED program card (optional)
Technical specifications:
| Konstanz- / peak current: | 60A / 390A | ||
| Type: | sensorless | ||
| Motor Limit: | 2s Onroad: 3650er engine,> = 5.5T 2s Offroad: 3650er engine,> = 8.5T 3s Onroad: 3650er engine,> = 9T 3s Offroad: 3650er engine,> = 13T |
||
| Internal resistance: | 0.0012 ohms | ||
| LiPo / NiMH battery pack: | 2-3s LiPo / 6-9 cells NiMH | ||
| S-BEC: | 6V / 3A | ||
| Programming Port: | Yes | ||
| Dimensions LxBxH: | 48.5x38x32mm | ||
| Mass: | 90g | ||
| Application: | 1/10 on and offroad | ||
Razer ten engine 3652 with 4000KV:
The Razer ten is a sensorless high-performance engine with enormous power. The demountable CNC machined aluminum housing, the finely balanced rotor with precision ball bearings are top notch equipment details.
Properties:
- 4-pole rotor design for high torque and fast response
- CNC machined, high-strength aluminum housing for optimum heat dissipation
- Motor winding made of pure, double insulated copper wire
- Precision ball bearing for best running smoothness and service life
- Highly flexible silicone connection cable with soldered 4mm plugs
- High strength and polished 3.17mm rotor shaft made of steel
Technical specifications:
| Article no.: | R01233 |
| Idle speed: | 4600KV |
| LiPo cells: | 2s |
| Pole: | 4 |
| Shaft diameter / length: | 3.17mm / 15mm |
| Dimensions D / L: | 35mm / 52mm |
| Weight (including cable) | 200 g |
| Application: | 1/10 onroad, buggy, light SCT / truck / MT |
Delivery:
1x controller ready wired with battery plug and motor connection
1x motor ready for connection with 4mm plug
1x manual
